im电竞app官网网

A dentil moulding is a moulding that has a decorative tooth-like pattern in it.  The tooth-like pattern is often accomplished by running an insert that a series of dados are cut into the piece to form the tooth pattern.  The insert can then be glued and or nailed in place, and gives  the appearance that the moulding is one solid piece.

im电竞竞猜app下载 manufactures stock dentil moulding inserts in both Red Oak and Poplar.  Dentil insert size and the size and spacing of dentil teeth may be customized.  Species other then Red Oak and Poplar are available as special order.

im电竞竞猜app下载 also has a number of crowns and other mouldings designed to accept various dentil inserts. Custom profiles can also be designed or modified to accept dentil inserts.  To see some of our stock dentil mouldings please visit our online moulding catalog and view the  Dentil  category.

Crowns and other mouldings may be ordered with the dentil inserts installed or they can be shipped as separate parts and installed at a later time

Stock or custom designed dentil mouldings can be included in a stock moulding program.

Combinations of  embossing  and dentil mouldings can be made to achieve a highly ornate moulding.

Priming, sanding and finishing options are available on dentil mouldings.

im电竞竞猜app下载 manufactures and stocks the following S4S dimension lumber items:

• 3/4 x 3-1/2″ Poplar S4S
• 3/4 x 5-1/2″ Poplar S4S
• 3/4 x 7-1/4″ Poplar S4S
• 3/4 x 9-1/4″ Poplar S4S
• 3/4 x 11-1/4″ Poplar S4S
• 1-1/16 x 3-1/2″ Poplar S4S
• 1-1/16 x 5-1/2″ Poplar S4S
• 1-1/16 x 7-1/4″ Poplar S4S
• 1-1/16 x 9-1/4″ Poplar S4S
• 1-1/16 x 11-1/4″ Poplar S4S
• 3/4 x 3-1/2″ Red Oak S4S
• 3/4 x 5-1/2″ Red Oak S4S
• 3/4 x 7-1/4″ Red Oak S4S
• 3/4 x 9-1/4″ Red Oak S4S
• 3/4 x 11-1/4″ Red Oak S4S

These items are put up in 500LF lots that are all 8 to 16′, with a few cutbacks to 6′ possible. The stock is above average grade and is mostly clear 1 face and 2 edges. We stock both Retail Packs  that are trimmed to the whole foot, both odd and even lengths which are perfect for retail sales, and  Random Length Packs  that is mostly whole foot stock, but may contain a percentage of material that is slightly over or slightly under length, which is perfect for contractor lumber yards or woodworking shops.

We can run other nominal sizes in Poplar and/or Red Oak for you as part of a custom stock program.

In addition to the material we stock run on the shelf, we can run dimension in a variety of species and custom sizes. Some of the other popular species for dimensional stock are:

We can also create a dimension program tailored to your customers’ needs to help you differentiate yourself from competitors and dominate local markets. Some examples of customized programs are:

Dimension for Retail Lumber Yards

• Red Oak and Poplar packs in 3/4 x 3-1/2″ through 3/4 x 11-1/4″
• Other hardwood species processed as ordered
• Lengths run from 6’ to 16’, and are double end trimmed to whole foot.
• The material is mostly clear 1 face and 2 edges.
• Bundle sizes of 250LF, 500LF or 1000 LF of each size.
• Each bundle is clearly tagged showing size, specie, and your UPC code.
• Piece tallies are attached to the bundles in the packing slip.
• Each pile is shrink-wrapped for protection.
• Options for  sanding  to 150 grit available on both faces and edges.
• Priming  and  finishing  options are also available.

Dimension for Contractor Lumber Yards

• In addition to stock packs as described above, hardwoods can be put up specifically for the needs of local contractors and builders.
• Custom S4S products can be included in stock program to enhance stock moulding selection.
• Packs can be created by size and specie to accommodate contractor customer base and storage systems.
• Hold for release programs are available for quick stock replacement,
• Tropical dimension can be included for exterior trim requirements, exterior priming available with water or solvent (alkyd/oil) based primers.
• Many contractors remanufacture the product on the jobsite, so S4S hardwoods can be produced as product of the grade with minimal trimming.
• Options for  sanding  to 150 grit available on both faces and edges.
• Priming  and  finishing  options are also available.

Dimension for Woodworking Shops

• Dimension hardwoods can be put up in any specie or quantity as random length, product of the grade
• Tallied by the moulder meter
• Options for  sanding  to 150 grit available on both faces and edges.
• Priming  and  finishing  options are also available.

Tropical wood decking offers low maintenance, natural beauty, natural durability and natural resistance to rot, decay and insects.

im电竞竞猜app下载 currently stocks tropical decking in the following species. Click on the images below for more information.

Some of the standard sizes that are typically available in decking include:

• 3/4 x 3-1/2″
• 1 x 3-1/2″
• 1-1/2 x 3-1/2″
• 5/4 x 4″
• 3/4 x 5-1/2″
• 1 x 5-1/2″
• 1-1/2 x 5-1/2″

Porch flooring also available in most species. Please inquire about custom sizes and profiles.

Any decking can be run through our moulders to add side grooves for use with deck clip systems.

Factory applied stains and finishes are available, including LEED compliant finishes.

Technical information and samples are available on all species carried.

At im电竞竞猜app下载 we have the capability to produce both solid and glued-up stair treads in a variety of profiles, thicknesses, widths, and lengths.

The standard sizes available in glued-up Red Oak and White Oak treads are as follows:

• 1-1/16 x 10-1/2 x 36″
• 1-1/16 x 11-1/2 x 36″
• 1-1/16 x 10-1/2 x 39″
• 1-1/16 x 11-1/2 x 39″
• 1-1/16 x 10-1/2 x 42″
• 1-1/16 x 11-1/2 x 42″
• 1-1/16 x 10-1/2 x 48″
• 1-1/16 x 11-1/2 x 48″
• 1-1/16 x 10-1/2 x 54″
• 1-1/16 x 11-1/2 x 54″
• 1-1/16 x 10-1/2 x 60″
• 1-1/16 x 11-1/2 x 60″
• 1-1/16 x 10-1/2 x 72″
• 1-1/16 x 11-1/2 x 72″

The above are also available in 3/4″ stock as well.

These treads are glued-up, clear one face, color matched (no sapwood or mineral), with 3 to 6 staves per piece, and are sanded to 120 grit.

Treads with miter returns on one or both ends are available.

We do stock the following Stair Treads in Red Oak that are pre-run and available for prompt shipment:

• 1-1/16 x 10-1/2 x 36″ Clear Tread
• 1-1/16 x 10-1/2 x 39″ Clear Tread
• 1-1/16 x 10-1/2 x 42″ Clear Tread
• 1-1/16 x 10-1/2 x 48″ Clear Tread

A minimum order of 50 pieces of any one size.

These treads are glued-up, clear one face, color matched (no sapwood or mineral), with 3 to 6 staves per piece, and are sanded to 120 grit.

If you stock and use stair treads we can create a stock program to meet your needs.

Other species including treads made from FSC® Certified lumber and reclaimed lumber are available as custom orders and can be run random length or cut to length.

Sanding available on faces available through wide belt sander, edge sanding up to 11-1/2″ is available through the profile sander.

In addition to stair treads we can also provide stair risers in a variety of species, widths or lengths.

The standard sizes available glued-up in Poplar and Red Oak are as follows:

• 3/4 x 8-1/4 x 36″
• 3/4 x 8-1/2 x 36″
• 3/4 x 8-1/4 x 39″
• 3/4 x 8-1/2 x 39″
• 3/4 x 8-1/4 x 42″
• 3/4 x 8-1/2 x 42″
• 3/4 x 8-1/4 x 45″
• 3/4 x 8-1/2 x 45″
• 3/4 x 8-1/4 x 48″
• 3/4 x 8-1/2 x 48″
• 3/4 x 8-1/4 x 54″
• 3/4 x 8-1/2 x 54″
• 3/4 x 8-1/4 x 60″
• 3/4 x 8-1/2 x 60″
• 3/4 x 8-1/4 x 72″
• 3/4 x 8-1/2 x 72″

The above is available in 7-1/2″ & 8″ widths also.

Glued up risers are clear one face, color matched (no sapwood or mineral in Red Oak, no dark green/purple in Poplar), and have3 to 4 staves per piece.

White Oak and other species including risers made from FSC® Certified lumber and reclaimed lumber are available as custom orders.

Risers may also be ordered as a lineal foot product that is run from solid lumber, which is not glued up for width.  This material is run product of the grade, and can be random length or cut-to-length.

Sanding  on the exposed face is available through our wide belt sander up to 150 grit.

Priming  is available through our vacuum coater for paint grade risers

Staining and  finishing  as well as paint topcoats are available on any riser products

im电竞竞猜app下载 has a stock selection of plinth blocks and bull’s-eye rosettes in Red Oak and Poplar.

Our standard plinth blocks are available in the following sizes:

• 1-1/16 x 2-3/4 x 4”
• 1-1/8 x 3-1/2 x 6”
• 1-1/8 x 4-1/4 x 8”

Our standard bull’s-eye rosettes are available in the following sizes:

• 11/16 x 2-3/4 x 2-3/4”
• 13/16 x 3-1/2 x 3-1/2”
• 13/16 x 4-1/4 x 4-1/4”

Please contact one of our salespeople for a CAD drawing of any of our stock plinth blocks and rosettes.

Custom plinth blocks and rosettes are available in various sizes, profiles and species.

im电竞竞猜app下载 is set up to run custom cellular PVC mouldings just like any other wood profile. These are cut, not extruded, ensuring clean, crisp, and sharp details.

im电竞竞猜app下载 stocks high quality PVC in sheet form.  The thicknesses we stock are ¾”, 1”, and 1-1/4”.

Your customers do not have to settle for the generic extruded mouldings, we can run your stock or custom mouldings in PVC.

Custom profiles can be made.

im电竞竞猜app下载 has the ability to laminate PVC to create blanks for handrails and other profiles larger than available thicknesses.  Special adhesives are required.

We offer priming with 100% acrylic exterior primer through our vacuum coater, the best finish for cellular PVC is Primed, Buffed, and & Primed.  When factory face is cut to make profiles, open cell foam interior is exposed which can give a rough or grainy appearance. While PVC will not rot or decay and is white throughout, dirt will accumulate in the open pores.  Priming will help fill in the open pores and reduce the rough appearance as well as help prevent dirt accumulation.

While we do stock PVC sheets, we can also run your PVC stock.

im电竞竞猜app下载 manufactures and stocks Poplar moulder blanks for prompt shipment.

Poplar moulder blanks are produced product of the grade.

We stock blanks made from 4/4, 5/4, 6/4 and 8/4 stock, which range from 1-1/4 to 11-1/2” widths.

We can also produce custom moulder blanks every specie of lumber that we have available.

Benefits of Buying Moulder Blanks

• Provide you a guaranteed yield and established price per lineal foot.
• You know the exact cost of the raw lumber going into your moulder.
• Uniform width and thickness lumber going into moulder.
• Lumber makes better stacks in shop
• Time and labor savings at planer and rip saws.
• Less waste in shop to dispose of.

im电竞竞猜app下载 stocks 16’ sheets of moulding grade MDF in thicknesses of 3/4”,.7/8”, and 1-1/8”.  We also can procure 3/8”, 1-1/2” and 2” stock for special orders.  We use a moulding grade to get a consistent finish throughout the moulding, this material differs from many standard MDFs that have a hard surface and a soft inner layer that mills differently.  We can manufacture any moulding profile within the dimensions of the MDF items in inventory.  Custom profile knives are made in-house, so we can match any custom or existing profile.

With additional lead time we can obtain different lengths.

No Added Urea Formaldehyde, Water Resistant and FRT MDF options are also available in many cases with additional lead times.

Due to the rough & flakey nature we sell all MDF mouldings as Primed & Buffed, although Primed, Buffed, Primed is recommended.

We have options to provide large quantities and stocking programs at competitive pricing.

Customer stock can be used for many MDF products – We can rip, crosscut, mould, and prime your stock for you.

One of the specialty mouldings that im电竞竞猜app下载 can manufacture is Hand Rail.

We can produce a wide variety of hand rails including several styles of 6010 & 6210.  Some of our stock hand rail profiles can be viewed in our online moulding catalog by selecting the  Hand Rail  category. If our stock profiles are not consistent with your needs we can match your profile with custom made knives.

Hand Rails we produce can be made from solid stock, finger joint stock and / or glue up stock.  Besides solid profiles we can also produce bending rail, including bending blocks, that can be steam bent to make curved and spiral rails.

In addition to hand rail, we can also run a variety of contemporary rail and exterior rail products for exterior stairs and decking.

Many of the hand rails we run can be sanded and finished.

Customer stock rails can be brought in to sand and / or finish as well.

Special fittings and CNC rail fittings available as custom order.

im电竞竞猜app下载 offers fire retardant coated mouldings that are run from 4/4 Red Oak and 4/4 through 8/4 Poplar.

Our fire retardant treatment is Dricon from Arch Chemicals. Kiln dried lumber is pressure treated to 100% penetration at a licensed pressure treating plant.  This is not a surface treatment or coating.  Following treatment, Dricon treated wood is re-dried to a moisture content of 6-8%

Dricon fire retardant treated material qualifies as a CLASS A/CLASS 1 fire retardant with flame spread and smoke development rating of 25 or less.

im电竞竞猜app下载 is the only moulding and millwork manufacturer that is authorized by Arch Chemicals (Dricon’s manufacturer) to perform unlimited millwork to Dricon treated red oak and poplar. Our millwork, re-drying procedures and recording practices are routinely audited by an independent third party auditor.  We can rip, plane, resaw, glue, and make custom mouldings.

With im电竞竞猜app下载’s extensive millwork capabilities, we can make virtually any profile, panel, or component. Rex provides a copy of the FRT treatment certificate with the invoice as verification that the products shipped were manufactured properly from that FRT load of material..

For “green” projects, we can provide DRICON Fire retardant treatment to FSC® certified Red Oak and Poplar; making the product both Class A fire rated and LEED compliant

For large projects requiring fire retardant lumber, yields can be improved and waste reduced by pre-selecting and pre-ripping /crosscutting blanks prior to treatment.

In addition to Dricon treated products in Red oak and poplar, we offer primer with fire retardant additives- reaching a Class A rating. Clear fire retardant coatings are also available for other species requiring a Class A fire rating.

im电竞竞猜app下载 has embossing equipment and close to 100 embossing wheels of different shapes and patterns.

Embossed mouldings are mouldings that have a decorative pattern pressed into the moulding in one of more places.  The pattern is pressed into the pattern by using a special wheel with the specific pattern in it.  Not only is pressure used, but the wheel is also heated, this helps the pattern to be embossed in the wood without tearing the grain.  Most species of lumber can be embossed; the softer the wood the easier the process, but even hard species like Hard Maple can be embossed.  Mouldings can have single embossed design or multiple embossed designs applied within the profile.  Multiple patterns require multiple passes through the embossing machine.

Our stock dentil mouldings can be viewed in our online moulding catalog by checking the  Embossed  category. If you do not find an embossed moulding to meet your needs, we can design a custom moulding using our stock embossing wheels.

Combinations of  dentil  and embossed mouldings can be made to achieve a highly ornate moulding.

Stock or custom designed embossed mouldings can be included in a stock moulding program.

Sanding is available prior to embossing.

Priming and finishing options are available.

im电竞竞猜app下载 manufactures many stock sizes and profiles of siding in a variety of species.

Some examples of common siding profiles are:

• 3/4 x 5-1/2 beveled siding, with resawn face option
• 3/4 x 7-1/4 beveled siding, with resawn face option
• 3/4 x 7-1/4 beveled siding with bead
• Custom size plain or rabbeted bevel, with a smooth or resawn face
• Tongue and groove siding up to 11-1/4”, with a smooth or resawn face
• Shiplap siding up to 11-1/4” wide, with a smooth or resawn face
• Shiplap with cove, with a smooth or resawn face
• Shiplap with v-joint, with a smooth or resawn face
• Shiplap with “V” and reveal, with a smooth or resawn face
• Board & Batten with resawn face up to 15” (ripped edge)
• Log Cabin Patterns

Many of the profiles can be found in our online moulding catalog, Please see the  Siding  category for more info.

While siding can be made from virtually any specie suitable for exterior use some of the typical species used to make siding are:

• Cypress
• Western Red Cedar
• Atlantic White Cedar
• Ipe’
• Accoya®
• East White Pine
• Teak
• Sapele
• South American Mahogany
• Douglas Fir
• African Mahogany
• Red Grandis®Eucalyptus

S4S and other exterior mouldings are available to complete the siding package.  Our stock exterior mouldings can be seen be found in our online moulding catalog in the  Exterior  category.

Priming is available using water based or solvent (oil/alkyd) based exterior primer.  Water based primer is applied in our vacuum coater and solvent based (oil/alkyd) based primers are applied through the spray finishing line.

Topcoats, stains, bleaching oil or other penetrating finishes can be applied through the spray line.

Customer stock may be used to make siding or other exterior trim items.